14 Tips for What to Do If Your Drone Loses Signal

Most drones are equipped with a signal to maintain contact for as long as possible. If the signal is lost, then it is important to know what to do in order to get it back.

The following article provides 14 tips on how you can find and regain control of your drone if it loses its connection.

14 Things to Do if your drone loses signal with its controller:

  1. Jammers are Interfering with Signal
  2. Geographical Location is Affecting Drone Signal
  3. Cables and Antennas are Lose or Corroded
  4. Controller and Drone need Reset
  5. Location Services are Turned ON
  6. The Drone is Not in Line of Sight
  7. Battery Levels of the Drone have Dropped
  8. Distance between Drone and Controller is Beyond the Design Range
  9. Controller and Drone Software is Not Updated
  10. Drone Controls have Malfunctioned
  11. Directional Antennas have Issues
  12. The connection between Drone and Connector is Patchy
  13. Other Sources are interfering with your Drone Signal
  14. Land and Find Your Drone

Let’s Discuss each of the reasons stated above in detail:

Jammers are Interfering with Signal

Jammers are one of the most common pieces of equipment that may interrupt your signal. If you think a jammer is interfering with your drone, then it’s best to move away from any jammers or other sources of interference. You should also check if there are any devices in close proximity which may be interfering with the signal.

Geographical Location is Affecting Drone Signal

The geographical location of where your drone is flying may also affect its connection to the controller, so it’s a good idea to have an idea about what type of terrain you are in and how that might affect your ability to maintain control over the device. For example, mountainous terrain or areas with a lot of foliage will make it more difficult to maintain contact.

Cables and Antennas are Lose or Corroded

If you are experiencing interference with the signal, then it may be a good idea to check your cables for wear. If they show any signs of damage or corrosion, then replace them. It is also important that antennas stay clean in order to maintain contact between drone and controller.

Controller and Drone need Reset

If your drone is completely unresponsive, then resetting both the controller and the device itself may be a possible solution. This can solve any lingering interference from other sources which are causing problems with connectivity between you and your product.

Location Services are Turned ON

It’s important to note that location services may also be causing your signal problems and you might need to disable it on both the controller and drone in order for them to regain contact. For example, an application like Google Maps could interfere with communication between devices if it is not disabled before use.

The Drone is Not in Line of Sight

It’s best to use your drone within line of sight, as this will reduce the possibility that it goes off course. You should also ensure that you keep a close eye on where both controller and device are located during periods when interference is an issue. If they become too far apart, then it may be difficult to regain contact.

Battery Levels of the Drone have Dropped

If your battery levels are dropping, then you should land the drone to avoid losing power. This will help keep it in contact with both controller and ground which may reduce interference that is occurring. It’s also a good idea not to fly for extended periods of time so as to minimize any chance of battery depletion.

Distance between Drone and Controller is Beyond the Design Range

The closer your controller and device are to one another, the easier it will be for them to maintain contact. This is why you should keep them within a certain range of each other at all times in order to avoid any issues which may occur as a result of signal loss. You also need to remember that there is an optimal range for your device.

Controller and Drone Software is Not Updated

If you haven’t updated the firmware on either controller or drone, then this is a good time to do so as it may help reduce any interference which has caused signal loss in the first place. You should also make sure that both are fully charged before taking them into use.

Drone Controls have Malfunctioned

Sometimes, the controls of your drone can malfunction and will need to be reset. Make sure that you do this before taking it into use in order to avoid any problems which may result from interference with signal loss or other technical difficulties.

Directional Antennas have Issues

If you are experiencing frequent connection issues when flying your drone, then it may be worth investing in directional antennas to improve signal reliability. This will help guide drones back towards the controller and grounding them so as to avoid any interference which might occur when simultaneously trying to stay within line of sight while also maintaining a certain range for optimal operation.

The connection between Drone and Connector is Patchy

If you are still having problems with signal loss, then it may be worth checking the connection between the controller and the device. You should also ensure that both are fully charged before taking them into use for optimal performance when needed.

Other Sources are interfering with your Drone Signal

It’s important to remember that there could be interference from other sources which might cause problems with connectivity between you and your product. You should therefore try to remove as many sources of interference from the area around you before taking it into use.

Land and Find Your Drone

If the signal is lost for an extended period of time, then you should fly your drone back down to land before proceeding any further in order to find out where it might have gone off course.

In Conclusion

It’s important to note that, while there will be some instances when the cause of interference cannot be identified and your signal may continue to suffer as a result, these tips should help you minimize any chances of losing connection with your device. This is an issue that can occur for a variety of reasons; it is important that you are fully aware of what those reasons may be in order to avoid future problems.

Leave a Reply